PRODUCTS

Tire Tread Depth Gauge 56-104

Quickcar 56-104 Tire Tread Depth Gauge Gauge that measures tire tread depth reads from 0" to 7/16" in 1/32" increments. For more accurate readings, additional markings indicate tire wear down to 1/128" so proper tire pressure, camber, and other alignment...

#10 Ring Terminals, 16-14 AWG 57-472

Quickcar 57-472 #10 Ring Terminals 16-14 AWG Pair of QuickCar’s copper electrical ring terminals. Uninsulated terminals offer the ability to easily solder the connection to ensure no failure. These are for 16-14 AWG wires and have a #10 (0...

Two Wire Electric Temp Sender 63-225

Quickcar 63-225 Two Wire Electric Temp Sender Temperature Sending Unit, 2 Wire, Electric, 0-320 Degrees, 1/8 in NPT Male, Each Accurately measure oil or water temperatures with the two wire internally grounded temperature sender meant to work with...

Electric Pressure Sender 0-100psi 63-230

Quickcar 63-230 Electric Pressure Sender 0-100psi Oil Pressure/Water Pressure sender/transducer. Reads 0-100 PSI. 1/8"NPT thread Item Specifics Alternate Description ELECTRIC PRESSURE SENDER 0-100PSI Part Number QRP63-230 Vendor...

5' Ignition Box Wiring Harness 50-200

Wiring Harness - Ignition, 12V, Starter, 5' 50-200 ABOUT STOCK WIRING HARNESSESReferred to as a Stock Wiring Harness, this ignition and accessory wiring harness is designed for use with cars utilizing remote ignition boxes like MSD or FAST systems...

Medium Red Biscuit 66-504

Quickcar 66-504 Medium Red Biscuit Biscuit for QuickCar's Torque Absorber. This biscuit is rated between the orange and black biscuits. QuickCar's most popular biscuit and is the recommended starting point for most cars. It has a 2-1/8" O.D. and 3/4" I.D...

5' HEI Wiring Harness 50-201

Wiring Harness - HEI Distributor, Starter, 5' 50-201 ABOUT STOCK WIRING HARNESSES Referred to as a Stock Wirring Harness, this ignition and accessory wiring harness is designed for use with cars utilizing HEI ignition systems. Stock harnesses connect...

Red 1 Post Power Junction 57-807

Quickcar 57-807 Red 1 Post Power Junction Junction Stud has 3/8" stainless steel post measuring 1" in height. Glass filled nylon base insulated the electric current from the mounting surface. 2 #10 (3/16") holes are pre-formed into the base to allow for...

1/4" Ring Terminals, 16-14 AWG 57-478

Quickcar 57-478 1/4" Ring Terminals, 16-14 AWG Pair of QuickCar’s copper electrical ring terminals. Uninsulated terminals offer the ability to easily solder the connection to ensure no failure. These are for 16-14 AWG wires and have a 1/4" eyelet,...

2 AWG 3/8" Power Rings 57-550

Quickcar 57-550 2 AWG 3/8" Power Rings These QuickCar Power Rings are designed to fit 2 Gauge Cable and have a 3/8" eyelet. They create a waterproof wire end (when used with shrink tubing). Sold as a pair of 2. Item Specifics Alternate...

Soft Yellow Biscuit 66-502

Quickcar 66-502 Soft Yellow Biscuit Biscuit for QuickCar's Torque Absorber. This biscuit is rated between the green and orange biscuits. It has a 2-1/8" O.D. and 3/4" I.D. Item Specifics Alternate Description REPLACEMENT BUSHING SOFT YELLOW ...

Weatherproof Single Pole Toggle Switch 50-410

Quickcar 50-410 Weatherproof Single Pole Toggle Switch This QuickCar weatherproof toggle switch is a single pole on/off type. Internally sealed, this switch is perfect for controlling an ignition system or accessory that may be in a high performance...

Starter Solenoid 50-430

Quickcar 50-430 Starter Solenoid This QuickCar Starter Solenoid is a Ford style and has a black finish. This Ford-style solenoid is perfect for use with high torque racing starters. The flat base eases mounting and a remote under hood starter switch or...

Blue Roll Bar Padding 58-232

Quickcar 58-232 Blue Roll Bar Padding QuickCar's blue roll bar padding uses closed-cell foam that gains density as it is compressed to absorb impact and help in preventing injury. Offset I.D. mounting tube in padding allows thicker padding to face the...

Green LED Pilot Light 50-609

Quickcar 50-609 Ing Panel Pilot Light Green This QuickCar LED indicator light has a green lens, fits a 1/2" I.D. hole, and has a positive and negative hookup. Commonly placed over a switch to indicate if it is in the "ON" position. Sold individually,...